Whole-Home Surge Protector Installation Near Brea, California
Whole-Home Surge Protector Installation Near Brea, California
Clean, safe installation — sized for your panel and loads.
We match your electrical system with a UL 1449–listed SPD and install it with short lead lengths, the correct breaker size, and proper grounding/bonding so the device can dump transient energy quickly and safely.
What We Install (Chosen for Your Home)
- Type 1 SPD (service entrance) or Type 2 SPD (panel-mounted)
- Main panel surge protection; subpanel SPDs where sensitive loads live (office, media, workshop)
- Point-of-use protection for specialty circuits if needed (network gear, AV rack, medical equipment)
We select SPDs with appropriate kA ratings, MCOV, and SCCR for your system and utility conditions.
Signs You’ll Benefit from a Whole-Home SPD
- You’ve had circuit board failures (HVAC, fridge, range, garage opener)
- Frequent flicker or power blips in your neighborhood
- You’re adding solar/EV charger/generator or major new appliances
- You rely on home office / networking gear and smart devices
- You’re upgrading the panel or doing other electrical work — add an SPD while we’re there
Our Surge Protection Installation Process
- Evaluate panel brand/model, grounding/bonding, and available spaces
- Recommend Type 1 vs. Type 2 and placement (main vs. subpanel)
- Install with short, direct conductors; torque to spec and label
- Test & verify indicator lights/status; review replacement indicators
- Walkthrough maintenance tips and layered protection strategy
You’ll know what we installed, where it is, and how to check it at a glance.
Care & Maintenance Tips
- Check the SPD status light monthly; call us if it shows service/replace
- Keep panel area clear and dry; avoid storage blocking access
- Use quality surge strips on office/AV equipment even with whole-home protection
- Schedule an electrical safety inspection every couple of years or after major work
Why Homeowners Choose Service Lion
- Local Brea / North OC licensed electricians
- Manufacturer-listed parts and code-compliant installs
- Floor/wall protection and tidy workmanship
- Clear options, clear pricing, no surprise add-ons
- We service what we install and stand behind our work
Code & Best-Practice Details We Handle
- UL 1449–listed devices matched to your panel and utility
- Correct breaker sizing and conductor routing (short leads reduce let-through)
- Grounding/bonding verification for effective surge diversion
- Weather-rated enclosures when installed outdoors
- Clean panel labeling and documentation
Layered Protection (Best Results)
- Whole-home panel SPD for big transients
- Quality plug-in strips with EMI/RFI filtration for sensitive electronics
- Dedicated circuits and proper neutral/ground integrity for AV/IT gear
- Whole-home surge + point-of-use = comprehensive protection
Helpful Add-Ons
- Panel tune-up (tighten lugs, labeling, thermal check)
- Whole-home surge paired with smart thermostat/IAQ/HVAC board protection
- GFCI/AFCI upgrades or dual-function breakers where required
- EV charger circuit or generator/transfer switch with coordinated protection
Ready to Schedule Whole-Home Surge Protection?
Call (657) 669-0259 or request service online. We’ll confirm your Brea / Orange County address and schedule your surge protector installation.
Home Surge Protection Offers & Services
Service Lion CA is Proud to Offer Affordable Financing Options.
Contact Us Today to Start Saving!
Upgrade your home hassle-free with our flexible financing options. From repairs to installations, we’ve got you covered. Contact Service Lion CA today to discover the perfect plan for your dream Brea, California home!
Home Surge Protection FAQs
What’s the difference between Type 1 and Type 2 SPDs?
Type 1 mounts at the service entrance (line or load side of the main). Type 2 mounts at distribution panels. We’ll recommend the best fit based on your layout and code.
Do I still need plug-in surge strips?
Yes. Whole-home SPDs handle big transients; plug-in strips add local filtering and protect specific electronics.
Will an SPD fix brownouts or sags?
No. SPDs protect against spikes/surges, not under-voltage. We can discuss power-conditioning/UPS options for sensitive gear.
How long does an SPD last?
They’re sacrificial devices. Many last years, but a severe surge can deplete them instantly (status light will indicate service/replace). We install models with clear indicators.
Does it protect my EV charger and HVAC?
Yes — panel SPDs help protect large electronic loads like EVSEs, heat pumps, furnaces, and ACs. We can also add local protection at subpanels.
Do I need a permit?
Some jurisdictions require a simple electrical permit. We’ll advise and pull permits when needed.
Can you add one during a panel upgrade?
Absolutely — it’s the ideal time. We’ll integrate the SPD into your new panel and label it for easy checks.
